Wright Williams & Kelly, Inc. Conducts 3rd Annual Semiconductor Manufacturing Technology Survey

Follow-Up to 2008 Survey Where Over 50% Said 450mm Wafers will Never Happen

February 18, 2009 (Pleasanton, CA) –Wright Williams & Kelly, Inc. (WWK), a cost & productivity management software and consulting services company, announced today the start of its 2009 survey on equipment and process timing in the semiconductor industry. The survey results will be consolidated and provided to all participants free of charge. Participation in the survey is the only way to receive a full set of results. The survey form can be downloaded from the WWK web site at: http://www.wwk.com/2009survey.pdf

Last year’s survey showed that respondents expect to see the following manufacturing technologies in production by 2010:
   • Double patterning
   • Equipment suppliers using remote diagnostic capability
   • Manufacturing capacity, utilization and cycle time simulation
   • Implementation of 300mm prime advances

By 2012, respondents expect to see:
   • 193 high index immersion lithography
   • Imprint lithography
   • Wafer-level reliability testing
   • 300mm whole wafer testing

However, survey respondents did not expect to see the following technologies in production until 2013 or beyond:
   • Direct write
   • EUV lithography
   • Directed Self Assembly Nano-resists

Daren Dance, WWK’s Vice President of Technology, commented, “We were not surprised in 2007 that the most frequent response to the question about 450mm wafer timing was 2013 or beyond but we were surprised that in 2008 56% of respondents indicated that 450mm wafers would never happen in production manufacturing. This year’s survey will look to see if those opinions, and others, have changed.”

Based on the results of the 2007 survey, WWK initiated a detailed cost study of projected 450mm wafer costs compared to an equivalent 300mm process. Details are found in “An Economic Comparison of 450mm and 300mm Wafer Fabs,” Wright Williams & Kelly, Inc. 2008, http://www.wwk.com/reports.html.

With more than 3,000 users worldwide, Wright Williams & Kelly, Inc. is the largest privately held operational cost management software and consulting company serving technology-dependent and technology-driven organizations. WWK maintains long-term relationships with prominent industry resources including SEMATECH, SELETE, Semiconductor Equipment and Materials International (SEMI), and national labs and universities. Its client base includes nearly all of the top 20 semiconductor manufacturers and equipment and materials suppliers as well as leaders in nanotechnology, micro-electro-mechanical systems (MEMS), thin film record heads, magnetic media, flat panel displays (FPD), and photovoltaics (PV).

WWK’s product line includes TWO COOL® for detailed process step level cost of ownership (COO) and overall equipment efficiency (OEE), PRO COOL® for process flow and test cell costing, Factory Commander® for full factory capacity analysis and activity based costing, and Factory Explorer® for cycle time reduction and WIP planning. Additionally, WWK offers a highly flexible product management software package that helps sales forces eliminate errors in product configuration and quotation processes.

Call today for more information from Wright Williams & Kelly, Inc. Providing software solutions for productivity measurement and enhancement since 1991.



Back to Top

 

 

 

SITE MAP 1SITE MAP 2SITE MAP 3

6200 Stoneridge Mall Road • 3rd Floor • Pleasanton, CA 94588 • Tel 925-399-6246 • Fax 925-396-6174
©1995-2015 Wright Williams & Kelly, Inc. • All Rights Reserved • Email: [email protected]